“RTC DS1307 DS3231库”的版本间的差异

RTC_DS1307_DS3231库 -- arduino实时时钟库（已支持ESP8266） GITHUB 工程地址：RTC by Makuna

支持设备

DS1307

Full support including squarewave output pin and memory access -- 全部功能支持，包括方波输出和内存访问

DS3231

Full support including squarewave output pin and alarms. -- 全部功能支持，包括方波输出和闹钟

示例

- DS1307_Memory: This demonstrates how to write and read data from the extended memory of the device. This memory is retained even after the device has lost power./演示如何读写数据从设备的扩展内存。即使设备掉电内存依然保存

- DS1307_Simple: This demonstrates how to set and get the date and time from the device./演示了如何在设备上设置和获取日期和时间

- DS3231_Alarms: This demonstrates how to set the alarms and check when the alarms are triggered. This includes using the squarewave output to trigger an interrupt./演示如何设置闹钟和检查何时触发闹钟。这包含使用方波输出触发一个中断

- DS3231_Simple: This demonstrates how to set and get the date and time from the device./演示如何在设备上设置和获取日期和时间。

- DS3231_StoreIt: This demonstrates how to turn off the Rtc clock so that the onboard battery will last longer./演示如何关闭RTC时钟以保证板载电池能持续更长时间

DS1307

DS1307 函数。

- Begin() -- 初始化

参数：无

返回：无

- GetIsRunning()

- SetIsRunning()

- SetDateTime()

- GetDateTime()

- SetMemory()

- GetMemory()

- SetSquareWavePin()

DS3231

DS3231 函数

- Begin() -- 初始化

参数：无

返回：无

-IsDateTimeValid() -- 检查日期时间是否有效

参数：无

返回：bool

- GetIsRunning()

- SetIsRunning()

-SetDateTime() -- 设置日期时间

参数：const RtcDateTime& dt

返回：无

-GetDateTime() -- 获取日期时间

参数：无

返回：RtcDateTime

- GetTemperature()

- Enable32kHzPin()

- SetSquareWavePin()

- SetSquareWavePinClockFrequency()

- SetAlarmOne()

- SetAlarmTwo()

- GetAlarmOne()

- GetAlarmTwo()

- LatchAlarmsTriggeredFlags()

- ForceTemperatureCompensationUpdate()

- GetAgingOffset()

- SetAgingOffset()

- getReg()

- setReg()